U650 Setting Modem; Setting The G3 Transmission Cable Equalizer; Setting The G3 Reception Cable Equalizer; Setting The Modem Detection Level - Kyocera FaxSystem(M) Service Manual

Maintenance
item No.
Setting modem 1
U650
Description
Sets the G3 cable equalizer.
Sets the modem detection level.
Start
1. Press the start key.
The port that is addressed by U698 is displayed when the optional dual FAX is installed.
2. Select the item to be set.
Display
REG. G3 TX EQR
REG. G3 RX EQR
RX MODEM LEVEL
The screen changes to the submenu for making settings.
The current settings are highlighted. If the optional dual FAX has been installed and if U698 is set to
[ALL] and settings for ports 1 and 2 are not identical, the display is not highlighted.

Setting the G3 transmission cable equalizer

Perform the following adjustment to make the equalizer compatible with the line characteristics.
1. Select the setting.
Display
0dB
4dB
8dB
12dB
2. Press the start key. The setting is set.

Setting the G3 reception cable equalizer

Perform the following adjustment to make the equalizer compatible with the line characteristics.
1. Select the setting.
Display
0dB
4dB
8dB
12dB
2. Press the start key. The setting is set.

Setting the modem detection level

To improve the transmission performance when a low quality line is used.
1. Select the setting.
Display
33dBm
38dBm
43dBm
48dBm
2. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Description
Description
Sets the G3 transmission cable equalizer.
Sets the G3 reception cable equalizer.
Sets the modem detection level.
Description
0dB
4dB
8dB
12dB
Description
0dB
4dB
8dB
12dB
Description
-33 dBm
-38 dBm
-43 dBm
-48 dBm
3KH-2
1-3-21