Setting The Loop Current Detection Before Dialing; U670 Outputting Lists - Kyocera FaxSystem(M) Service Manual

3KH-3
Maintenance
item No.
Setting for a PBX
U660
Selects the mode to connect an outside call when connected to a PBX.
(cont.)
According to the type of the PBX connected, select the mode to connect an outside call.
1. Select the setting.
Display
EARTH
FLASH
LOOP
2. Press the start key. The setting is set.

Setting the loop current detection before dialing

Sets if the loop current detection is performed before dialing.
1. Select the setting.
Display
ON
OFF
2. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Outputting lists
U670
Description
Outputs a list of data regarding fax transmissions.
Printing a list is disabled either when a job is remaining in the buffer or when [Pause All Print Jobs] is pressed
to halt printing.
Purpose
To check conditions of use, settings and transmission procedures of the fax.
Method
1. Press the start key.
The port that is addressed by U698 is displayed when the optional dual FAX is installed.
2. Select the item to be output.
3. Press the start key. The selected list is output.
When [ERROR LIST] is selected and the dual FAX is not installed, regardless of the port being dis-
played, a Port 1 error list is delivered; while if the dual FAX is installed, an error list containing errors at
both Port 1 and 2 is delivered.
When [FAX REPORT (BACKUP)] is selected, regardless of the port being displayed, the historical
record of all fax and Internet-fax job as well as the reserved fax job information are delivered to a log.
Display
SETTING LIST
ACTION LIST
SELF ST REPORT
PROTOCOL LIST
ERROR LIST
FAX REPORT (BACKUP)
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
1-3-24
Description
Description
Earth mode
Flashing mode
Code number mode
Description
Performs loop current detection before dialing.
Does not perform loop current detection before dialing.
Description
Outputs a list of software switches, self telephone number, confiden-
tial boxes, ROM versions and other information.
Outputs a list of error history, transmission line details and other infor-
mation.
Outputs a list of settings in maintenance mode (own-status report)
regarding fax transmission only.
Outputs a list of transmission procedures.
Outputs a list of error.
Outputs the historical record of the fax and Internet-fax job informa-
tion as well as the reserved fax jobs.