U611 Setting System; Setting The Number Of Adjustment Lines For Automatic Reduction; When A4 Paper Is Set; When Letter Size Paper Is Set - Kyocera FaxSystem(M) Service Manual

3KH-2
Maintenance
item No.
U610 1. Change the setting using the +/- or numeric keys.
(cont.)
Description
Number of lines to be ignored when receiv-
ing a fax (A4R, letter) in the auto reduction
mode
Increase the setting if a page received in the reduction mode is over-reduced and too much trailing
edge margin is left. Decrease it if the received image does not include all transmitted data.
2. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Setting system 2
U611
Description
Sets the number of adjustment lines for automatic reduction.
Start
1. Press the start key. The current setting is displayed in each item.
2. Select the item to be set.
Display
ADJ LINES
ADJ LINES (A4)
ADJ LINES (LT)

Setting the number of adjustment lines for automatic reduction

Sets the number of adjustment lines for automatic reduction.
1. Change the setting using the +/- or numeric keys.
Description
Number of adjustment lines for automatic reduction
2. Press the start key. The value is set.
Setting the number of adjustment lines for automatic reduction when A4 paper is set
Sets the number of adjustment lines for automatic reduction when A4 paper is set.
1. Change the setting using the +/- or numeric keys.
Description
Number of adjustment lines for automatic reduction

when A4 paper is set

2. Press the start key. The value is set.
Setting the number of adjustment lines for automatic reduction when letter size paper is set
Sets the number of adjustment lines for automatic reduction when letter size paper is set.
1. Change the setting using the +/- or numeric keys.
Description
Number of adjustment lines for automatic reduction

when letter size paper is set

2. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
1-3-10
Description
Setting range
0 to 22
Description
Sets the number of adjustment lines for automatic reduction.
Sets the number of adjustment lines for automatic reduction when A4
paper is set.
Sets the number of adjustment lines for automatic reduction when let-
ter size paper is set.
Initial setting Change in value
per step
0 16 lines
Setting range Initial setting
0 to 22 7
Setting range Initial setting
0 to 22 22
Setting range Initial setting
0 to 26 26