Navigation Panel; Table 4 Screens Summary - ZyXEL Communications NBG318S User Manual

Chapter 3 Introducing the Web Configurator
Table 3 Web Configurator Status Screen (continued)
LABEL
- UPnP
- Configuration Mode
Interface Status
Interface
Status
Rate
Summary
Any IP Table
BW MGMT Monitor
DHCP Table
Packet Statistics
WLAN Station Status
My HomePlug Network

3.4.2 Navigation Panel

After you enter the password, use the sub-menus on the navigation panel to configure
NBG318S features.
The following table describes the sub-menus.

Table 4 Screens Summary

LINK
Status
Network
48
DESCRIPTION
This shows whether UPnP is active or not.
This shows whether the advanced screens of each feature are turned on
(Advanced) or not (Basic).
This displays the NBG318S port types. The port types are: WAN, LAN, HomePlug
AV and WLAN.
For the LAN and WAN ports, this field displays Down (line is down) or Up (line is up
or connected).
For the WLAN, it displays Up when the WLAN is enabled or Down when the WLAN
is disabled.
For the HomePlug AV port it displays Up when the power cord is connected.
For the LAN ports, this displays the port speed and duplex setting or N/A when the
line is disconnected.
For the WAN port, it displays the port speed and duplex setting if you're using
Ethernet encapsulation and Idle (line (ppp) idle), Dial (starting to trigger a call) and
Drop (dropping a call) if you're using PPPoE or PPTP encapsulation. This field
displays N/A when the line is disconnected.
For the WLAN, it displays the maximum transmission rate when the WLAN is
enabled and N/A when the WLAN is disabled.
For the HomePlug AV port it displays the maximum transmission rate when the
HomePlug AV is enabled.
Use this screen to view details of IP addresses assigned to devices not in the same
subnet as the NBG318S.
Use this screen to view the NBG318S's bandwidth usage and allotments.
Use this screen to view current DHCP client information.
Use this screen to view port status and packet specific statistics.
Use this screen to view the wireless stations that are currently associated to the
NBG318S.
Use this screen to view information on the stations connected to your Home Plug
network.
TAB FUNCTION
This screen shows the NBG318S's general device, system and
interface status information. Use this screen to access the wizard,
and summary statistics tables.
NBG318S User's Guide