Basic Sending Operations; Contrast; Fax Resolution - Brother MFC-8500 Owner's Manual

Basic Sending Operations

Contrast

If your document is very light or very dark, you might want to set the contrast.
Use S.LIGHT
document.
1
Place the original face down in the ADF.
2
Press Menu, 2, 2, 1.
3
Use or
4
Press 1 if you want to select additional settings. The LCD returns to the
SETUP SEND
go to Step 5.
5
Enter a fax number, and then press Fax Start to send a fax.

Fax Resolution

When you have an original in the ADF, you can use the Fax Resolution key
to temporarily change the setting. Press Fax Resolution repeatedly until the
LCD shows the setting you want.
—OR—
You can change the default setting.
1
Press Menu, 2, 2, 2.
2
Press or
you want, and then press Set.
3
Press Stop/Exit.
STANDARD—Suitable for most typed documents.
FINE—Good for small print; transmits a little slower than Standard resolution.
S. FINE—Good for small print or artwork; transmits slower than Fine
resolution.
PHOTO—Use when original has varying shades of gray; slowest transmission
time.
to send a very light document. Use
to select AUTO, S.LIGHT
menu—OR—Press 2 if you are finished choosing settings, and
to select the resolution
S.DARK to send a very dark
1.CONTRAST
or S.DARK, and then press Set.
2.FAX RESOLUTION
S E T U P S E N D
6 - 5