Brother MFC-8500 Owner's Manual page 186

Hide thumbs Also See for MFC-8500:
Table of Contents

Advertisement

Error Message
COOLING DOWN
WAIT FOR A
WHILE
COVER OPEN
PLS CLOSE COVER
DISCONNECTED
CHECK
DOCUMENT
MACHINE ERROR
XX
OUT OF MEMORY
(May occur when the
machine is used as a
printer)
NO RESPONSE /
BUSY
NOT REGISTERED
T R O U B L E S H O O T I N G A N D R O U T I N E M A I N T E N A N C E
Error Messages
Cause
The temperature of the drum unit or
toner cartridge is too hot. The
machine will pause its current print
job and go into cooling down mode.
During the cooling down mode, you
will hear the cooling fan running
while the display on the machine
shows
COOLING DOWN
WAIT FOR A
WHILE.
The front cover was not completely
closed.
The other party or other party's fax
machine terminated the call.
Documents did not feed properly or
document was too long.
Machine has a mechanical problem. Turn the power off. Then call
Machine memory capacity has been
exceeded.
The number you called does not
answer or is busy.
Or, you may have reached a number
that is not connected to a fax
machine.
The One Touch or Speed Dial
number that you accessed is not
programmed.
Action
You must wait and allow the
machine to resume printing when it
is ready.
and
Close the front cover for the drum
unit.
Try to fax or receive again or call
the other party to see what
happened.
Do not pull paper out until you read
Page 22-4.
Brother Customer Service at
In USA:
• If you have installed the
®
Windows
driver, try again after
setting the True Type mode to
"Print as Graphics" in the PRINT
menu of your application
software.
• Reduce the print resolution or
reduce the complexity of your
document.
Check the number and try again.
Set up the One Touch or Speed Dial
number.
(See Pages 7-1, 7-2.)
1-866-851-2200
22 - 2

Advertisement

Table of Contents
loading

Table of Contents