Prescanning An Image - Brother MFC-8500 Owner's Manual

PreScanning an Image

PreScanning allows you to scan an image quickly at a low resolution. A
thumbnail version of the image will appear in the Scanning Area. This is only
a preview of the image so you can see how it will look. The PreScan button is
used to preview an image for cropping any unwanted portions from the image.
When you are satisfied with the preview, select the Start button to scan the
image.
1
Insert document face down in document feeder of the machine.
2
Select the PreScan button:
The entire document will be scanned into the PC and will appear in the Scanning
Area of the Scanner window.
3
To crop a portion of the document to be scanned, drag any side or corner of the
dotted outline in the Scanning Area with the left mouse button. Adjust the dotted
outline until it surrounds only the portion of the document you wish to scan.
4
Place document in the document feeder of the machine again.
5
Adjust the settings for Resolution, Color Type (Gray Scale), Brightness,
Contrast, and Size in the Scanner Setup window, as needed.
6
Select the Start button.
This time only the selected area of the document will appear in the PaperPort
window.
7
In the PaperPort
menu and the Crop option in the Options pull-down menu to refine the image.
U S I N G S C A N S O F T™ P A P E R P O R T
®
window, use the options available in the Markups pull-down
®
F O R B R O T H E R A N D S C A N S O F T™ T E X T B R I D G E
You can crop
the prescanned
image
®
®
16 - 7