Basic sending operations
Sending faxes using multiple settings
When you send a fax you can choose any combination of these
settings: cover page, contrast, resolution, overseas mode, delayed
fax timer, polling transmission or real time transmission. After each
setting is accepted, the LCD will ask if you want to enter more
settings:
1
Press
to select more settings. The LCD
will return to the Setup Send menu.
—OR—
2
Press
if you have finished choosing settings and go to the next
step.
Contrast
If your original document is very light or very dark, you may want to
set the contrast.
Use Light to send a light original document.
Use Dark to send a dark original document.
1
If it is not illuminated in green, press
original document face down in the ADF.
2
Menu
Press
3
Press
Light or Dark .
Set
Press
.
4
1
Press
if you want to choose more settings and the LCD will
return to the Setup Send menu.
—OR—
2
Press
if you have finished choosing settings for this page, and
then go to Step 5.
5
Enter a fax number.
6
Start
Press
6 - 5 SETUP SEND
2
2
1
,
,
,
.
or
to select Auto ,
.
Next
1.Yes 2.No
Fax
(
). Place the
Setup Send
1.Contrast