Aaeon AVR-3000 User Manual page 65

Grouping Presets
The remaining presets are only used to view
pictures in particular directions more conveniently.
The main purpose of Group presets is to allow
the user to Auto Pan to specific preset points.
When the presets are complete, follow
these instructions to Auto Pan the PTZ cameras
according to the presets in the groups:
1. Create all the presets in the groups.
2. Choose the number of the group(such as Group
1, Group 2, etc.) under the Pan Group Number.
3. Click "Set Group"
4. Click "Run Sequence", then the PTZ cameras
will begin to Auto Pan according to the presets
in the group.
PAN SCAN
This DVR system allows the user to set up the PTZ camera to scan from
the SET START to SET END
1. AUTO PAN: allows the PTZ camera to move
horizontally from the set start and set end.
2. SET START: this parameter is used to set
current preset point as the SET START.
3. SET END: this parameter is used to set the
current preset point as the SET END.
4. Scan Speed: used to select the speed (0-255)
for PTZ camera AUTO PAN. After finishing
the selection of this setting, please click "SET
SPEED" to save the setting.
Chapter 10
Pic10-7: Grouping Preset
Pic10-8: Pan Scan
49