Aaeon AEC-6950 Manual
  1. Manuals
  2. Brands
  3. Aaeon Manuals
  4. Controller
  5. AEC-6950
  6. Manual

Aaeon AEC-6950 Manual

Fanless embedded controller
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
E m b e d d e d C o n t r o l l e r
A E C - 6 9 5 0
AEC-6950
Fanless Embedded Controller
®
Intel
Core™ i7-3517UE 1.7GHz
Processor
2 PCI or PCI-E[x1]/ PCI-E[x16]
2 GbE/ 8 COMs/
4 USB2.0, 2 USB3.0
Mini PCIe x 2
rd
AEC-6950 Manual 3
Ed.
April 2, 2018

Advertisement

Table of Contents
loading

Related Manuals for Aaeon AEC-6950

Summary of Contents for Aaeon AEC-6950

  • Page 1 A E C - 6 9 5 0 AEC-6950 Fanless Embedded Controller ® Intel Core™ i7-3517UE 1.7GHz Processor 2 PCI or PCI-E[x1]/ PCI-E[x16] 2 GbE/ 8 COMs/ 4 USB2.0, 2 USB3.0 Mini PCIe x 2 AEC-6950 Manual 3 April 2, 2018...
  • Page 2 AAEON assumes no liabilities resulting from errors or omissions in this document, or from the use of the information contained herein. AAEON reserves the right to make changes in the product design without notice to its users.
  • Page 3 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 Acknowledgments  AMI is a trademark of American Megatrends Inc.  ™ CFast is a trademark of the Compact Flash Association. ...
  • Page 4 A E C - 6 9 5 0 Packing List Before you begin operating your PC, please make sure that the following materials have been shipped:  AEC-6950 Embedded Controller  Phoenix Power Connector  M3 x 4mm Screws ...
  • Page 5 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 Safety & Warranty 1. Read these safety instructions carefully. 2. Keep this user's manual for later reference. 3.
  • Page 6 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 The equipment does not work well, or you cannot get it to work according to the user’s manual. The equipment has been dropped and damaged.
  • Page 7 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 Below Table for China RoHS Requirements 产品中有毒有害物质或元素名称及含量 AAEON Boxer/ Industrial System 有毒有害物质或元素 部件名称 铅...

  • Page 8: Table Of Contents

    E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 Contents Chapter 1 General Information 1.1 Introduction ..............1-2 1.2 Features ..............1-3 1.3 Specifications ............1-4 Chapter 2 Hardware Installation 2.1 Jumpers and Connectors of Main Board....
  • Page 9 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 2.16 1000Base-T Ethernet Connector with Dock USB 3.0 Connector (CN13) ............2-9 2.17 LVDS Connector (CN17) ......... 2-10 2.18 RS-232/422/485 Pin DEFINE (COM1)(CN19) ..
  • Page 10 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 Appendix B I/O Information B.1 I/O Address Map ..........B-2 B.2 Memory Address Map .......... B-4 B.3 IRQ Mapping Chart ..........

  • Page 11: Chapter 1 General Information

    E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 Chapter General Information Chapter 1 General Information...

  • Page 12: Introduction

    Processing, Fleet Management, Data Management. AEC-6950 equips a high efficiency heat conduction mechanism. The AEC-6950 is compact in size but has attractive and flexible extension capabilities such as 4 USB 2.0 ports and 2 USB 3.0 ports, VGA, Audio, 8 COM ports, and 2 PCI or PCI-E[x1].

  • Page 13: Features

    E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 1.2 Features Core™ i7-3517UE 1.7GHz Processor  ® Intel  QM77 Chipset  COM Module Integrated ...

  • Page 14: Specifications

    E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 1.3 Specifications  CPU Intel® Core™ i7 3517UE .17GHz  Chipset Intel® QM77PCH (COM module) ...
  • Page 15 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 － Others Power Button x 1 Indicator x 2 (system x 1 and HDD x 1) SIM Slot x 1 ...
  • Page 16 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0  Mounting Wallmount  Operating Temperature -4°F ~ 122°F (-20°C ~ 50°C) w/o Airflow (according to IEC 60950-1) ...
  • Page 17 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 Chapter 1 General Information...

  • Page 18: Chapter 2 Hardware Installation

    E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 Chapter Hardware Installation Chapter 2 Hardware Installation...

  • Page 19: Jumpers And Connectors Of Main Board

    E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 2.1 Jumpers and Connectors of Main Board 2 - 2 Chapter 2 Hardware Installation Solder Side...

  • Page 20: Dimension

    E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 2.2 Dimension 2 - 3 Chapter 2 Hardware Installation...

  • Page 21: List Of Jumpers

    E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 2.3 List of Jumpers The board has a number of jumpers that allow you to configure your system to suit your application.
  • Page 22 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 Mini Card Connector With external SIM Mini Card Connector With on board SIM PCIE*16 Connector CFast™...

  • Page 23: Setting Jumpers

    E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 SATA1 SATA 3.0 Connector SATA2 SATA2.0 Connector FAN1 4-pin Fan Connector 2.5 Setting Jumpers You configure your card to match the needs of your application by setting jumpers.

  • Page 24: Isolation Com1, Com2 Rs232/Rs485/Rs422 Selection

    E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 2.6 Isolation COM1, COM2 RS232/RS485/RS422 selection (JP3, JP4) J P 3 , J P 4 Function RS232 1-2,3-4,5-6 close...

  • Page 25: Com4 +12V/+5V/Ring Selection (Jp12)

    E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 2.11 COM4 +12V/+5V/Ring Selection (JP12) JP12 Signal +12V Ring (Default) 2.12 Clear CMOS (JP13) JP13 Function Normal (Default)

  • Page 26: 1000Base-T Ethernet Connector With Dock Usb

    E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 MDI1- MDI2+ MDI2- MDI3+ MDI3- LAN_LED_ACT# LAN_LED_ACT LAN_LED_LINK100# LAN_LED_LINK 1000# USBD2- USBD2+ USBD3- USBD3+ 2.16 1000Base-T Ethernet Connector with Dock USB 3.0 Connector (CN13) Signal...

  • Page 27: Lvds Connector (Cn17)

    E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 USB_SSRX0N_C USB_SSRX0P_ USB_SSTX0N_ USB_SSTX0P_C USBD1- USBD1+ USB_SSRX1N_ USB_SSRX1P_C USB_SSTX1N_C USB_SSTX1P_ 2.17 LVDS Connector (CN17) P in S ignal S ignal...

  • Page 28: Rs-232/422/485 Pin Define (Com1)(Cn19)

    E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 LVDSB_DATA3# LVDSB_DATA3 LVDSVCC LVDSB_CLK# LVDSB_CLK 2.18 RS-232/422/485 Pin DEFINE (COM1)(CN19) RS-232 Mode P in S ignal S ignal 2 5 B...

  • Page 29: Header (Com3)(Cn20)

    E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 2.19 RS-232 Header (COM3)(CN20) P in S ignal S ignal 2 5 B RI/+5V/+12V 2.20 RS-232 Header (COM4) (CN21) P in S ignal...

  • Page 30: Rs-232/422/485 Pin Define (Com7)(Cn24)

    E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 2.23 RS-232/422/485 Pin DEFINE (COM7)(CN24) RS-232 Mode P in S ignal S ignal 2 5 B RS-422 Mode P in S ignal...

  • Page 31: Rs-232/422/485 Pin Define (Com2)(Cn26)

    E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 RS-422 mode P in S ignal S ignal 2 5 B TXD- RXD+ TXD+ RXD- RS-485 mode P in...

  • Page 32: Iso Dio(Cn29)

    E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 RS-422 Mode P in S ignal S ignal 2 5 B TXD- RXD+ TXD+ RXD- RS-485 Mode P in...

  • Page 33: Front Panel Connector (Cn38)

    E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 2.28 Front Panel Connector (CN38) P in S ignal S ignal 2 5 B Power On Button (-) Power On Button (+) HDD LED (-)

  • Page 34: Pci Card Installation

    E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 2.30 PCI Card Installation Step 1: Unfasten the screw on the rear panel. Step 2: Unfasten the screw on the front panel. 2 - 17 Chapter 2 Hardware Installation...
  • Page 35 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 Step 3: Unfasten the six screws on the bottom lid. Step 4: Remove the screw with your finger and get the PCI card ready to install.
  • Page 36 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 Step 5: Insert the PCI card into the PCI slot and reattach the screw. Step 6: Unfasten the screws and push the tenon to lock the PCI card in position.
  • Page 37 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 Step 7: Close the bottom lid of the AEC-6950 and fasten six screws on bottom lid.
  • Page 38 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 2 - 21 Chapter 2 Hardware Installation...

  • Page 39: Wallmount Kit Installation

    2.31 Wallmount kit Installation Step 1: Get the brackets ready and fasten appropriate three screws on each bracket. After fastening the two brackets on the bottom lid of AEC-6950, the wallmount kit installation is finished 2 - 22 Chapter 2 Hardware Installation...
  • Page 40 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 2 - 23 Chapter 2 Hardware Installation...
  • Page 41 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 Chapter BIOS Setup Chapter 3 AMI BIOS Setup 3-1...

  • Page 42: System Test And Initialization

    4. The CMOS memory has lost power and the configuration information has been erased. The AEC-6950 CMOS memory has an integral lithium battery backup for data retention. However, you will need to replace the complete unit when it finally runs down.

  • Page 43: Ami Bios Setup

    E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 3.2 AMI BIOS Setup AMI BIOS ROM has a built-in Setup program that allows users to modify the basic system configuration.
  • Page 44 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 Setup Menu Setup submenu: Main Chapter 3 AMI BIOS Setup 3-4...
  • Page 45 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 Setup submenu: Advanced Chapter 3 AMI BIOS Setup 3-5...
  • Page 46 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 Trusted Computing Option summary: Security Device Support Disable Default Enable Enables or Disables BIOS support for security device. O.S. will not show security device.
  • Page 47 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 CPU Configuration Option summary: Hyper-Threading Disabled Enabled Default Enabled for Windows XP and Linux (OS optimized for Hyper-Threading Technology) and Disabled for other OS (OS not optimized for Hyper-Threading Technology).
  • Page 48 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 SATA Configuration (IDE) Option summary: SATA Controllers Disabled Enabled Default En/Disable SATA Controller. SATA Mode Selection Default AHCI RAID...
  • Page 49 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 SATA Configuration (AHCI) Option summary: Hot Plug Disabled Enabled Default En/Disable Hot Plug feature. Port 3 Disabled Enabled...
  • Page 50 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 SATA Configuration (RAID) Option summary: Hot Plug Disabled Enabled Default En/Disable Hot Plug feature. Port 3 Disabled Enabled...
  • Page 51 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 AMT Configuration Option summary: Intel AMT Disabled Default Enabled Enables or Disables Intel(R) Active Management Technology BIOS Extension. Note: iAMT H/W is always enabled.
  • Page 52 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 USB Configuration Option summary: Legacy USB Support Enabled Default Disabled Auto Enables BIOS Support for Legacy USB Support. When enabled, USB can be functional in legacy environment like DOS.
  • Page 53 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 Dynamic Digital IO Options summary: Dynamic Digital IO Disabled Default Support Enabled En/Disable Dynamic Digital IO Support. Chapter 3 AMI BIOS Setup 3-13...
  • Page 54 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 Dynamic Digital IO Configuration Options summary: GPI0~3 Direction Input Default Output Set GPIO as Input or Output. GPO0~3 Direction Input Output...
  • Page 55 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 On-Module H/W Monitor Chapter 3 AMI BIOS Setup 3-15...
  • Page 56 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 F81866 Super IO Configuration Chapter 3 AMI BIOS Setup 3-16...
  • Page 57 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 Serial Port 1 Configuration Options summary: Serial Port Disabled Enabled Default Allows BIOS to En/Disable correspond serial port. Change Settings Auto Default...
  • Page 58 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 Serial Port 2 Configuration Options summary: Serial Port Disabled Enabled Default Allows BIOS to En/Disable correspond serial port. Change Settings Auto Default...
  • Page 59 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 Serial Port 3 Configuration Options summary: Serial Port Disabled Enabled Default Allows BIOS to En/Disable correspond serial port. Change Settings Auto Default...
  • Page 60 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 Serial Port 4 Configuration Options summary: Serial Port Disabled Enabled Default Allows BIOS to En/Disable correspond serial port. Change Settings Auto Default...
  • Page 61 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 Serial Port 5 Configuration Options summary: Serial Port Disabled Enabled Default Allows BIOS to En/Disable correspond serial port. Change Settings Auto Default...
  • Page 62 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 F81866 H/W Monitor Chapter 3 AMI BIOS Setup 3-22...
  • Page 63 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 F81216 Second Super IO Configuration Chapter 3 AMI BIOS Setup 3-23...
  • Page 64 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 Serial Port 6 Configuration Options summary: Serial Port Disabled Enabled Default Allows BIOS to En/Disable correspond serial port. Change Settings Auto Default...
  • Page 65 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 Serial Port 7 Configuration Options summary: Serial Port Disabled Enabled Default Allows BIOS to En/Disable correspond serial port. Change Settings Auto Default...
  • Page 66 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 Serial Port 8 Configuration Options summary: Serial Port Disabled Enabled Default Allows BIOS to En/Disable correspond serial port. Change Settings Auto Default...
  • Page 67 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 S5 RTC Wake Settings (Fixed Time) Options summary: Wake system with Disabled Optimal Default, Failsafe Default Fixed Time Enabled En/Disable System wake on alarm event.
  • Page 68 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 S5 RTC Wake Settings (Dynamic Time) Options summary: Wake system with Disabled Optimal Default, Failsafe Default Dynamic Time Enabled En/Disable System wake on alarm event.
  • Page 69 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 Setup submenu: Chipset Chapter 3 AMI BIOS Setup 3-29...
  • Page 70 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 PCH-IO Configuration Chapter 3 AMI BIOS Setup 3-30...
  • Page 71 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 Option summary: Power Mode ATX Type Default AT Type Select power supply mode Restore on AC Power Loss Last State Default Always On Always Off...
  • Page 72 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 PCI Express Configuration Option summary: PCI Express Root Port Enabled Default (1 - 7) Disabled Control the PCI Express Root Port.
  • Page 73 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 System Agent (SA) Configuration Option summary: PEGO – Gen Speed Auto Default Gen1 Gen2 Gen3 Configure PEG0 B0:D1:F0 Gen1-Gen3 VT-d...
  • Page 74 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 Graphics Configuration Option summary: Primary Display Auto Default IGFX Select which of IGFX/PEG/PCI Graphics device should be Primary Display Or select SG for Switchable Gfx.
  • Page 75 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 288M 320M 352M 284M 416M 448M 480M 512M 1024M Select DVMT 5.0 Pre-Allocated (Fixed) Graphics Memory size used by the Internal Graphics Device.
  • Page 76 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 Display Control Option summary: Boot Display Select VBIOS Default Default DVI-I DVI-D Select the Video Device which will be activated during POST and DOS. This has no effect if external graphics present.
  • Page 77 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 Setup submenu: Boot Option summary: Quiet Boot Disabled Enabled Default Enables or Disables showing boot logo. Launch I82579LM PXE Disabled Default...
  • Page 78 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 BBS Priorities Chapter 3 AMI BIOS Setup 3-38...
  • Page 79 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 Security Change User/Supervisor Password You can install a Supervisor password, and if you install a supervisor password, you can then install a user password.
  • Page 80 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 Setup submenu: Exit Chapter 3 AMI BIOS Setup 3-40...

  • Page 81: Chapter 4 Driver Installation

    E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 Chapter D river Installation 4 -1 Chapter 4 Driver Installation...
  • Page 82 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 The AEC-6950 comes with an AutoRun DVD-ROM that contains all drivers and utilities that can help you to install the driver automatically.
  • Page 83 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 4.1 Installation: Insert the AEC-6950 DVD-ROM into the DVD-ROM drive. And install the drivers from Step 1 to Step 9 in order. Step 1 – Install Chipset Driver Click on the Step 1 - Chipset folder and double click on the Setup.exe file...
  • Page 84 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 Step 4 –Install Audio Driver Click on the Step 4 - Audio folder and select the OS folder your system is Double click on the Setup.exe located in each OS folder Follow the instructions that the window shows...
  • Page 85 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 Follow the instructions that the window shows The system will help you install the driver automatically Step 9 –...
  • Page 86 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 Change User Account Control Settings to [Never notify] Reboot and Administrator login 4 -6 Chapter 4 Driver Installation...
  • Page 87 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 To run patch.bat with [Run as administrator] 4 -7 Chapter 4 Driver Installation...

  • Page 88: Appendix A Programming The Watchdog Timer

    E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 Appendix Programming the Watchdog Timer Appendix A Programming the Watchdog Timer A-1...

  • Page 89: Watchdog Timer Initial Program

    E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 A.1 Watchdog Timer Initial Program Table 1 : SuperIO relative register table Default Value Note SIO MB PnP Mode Index Register Index...
  • Page 90 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 ************************************************************************************ // SuperIO relative definition (Please reference to Table 1) #define byte SIOIndex //This parameter is represented from Note1 #define byte SIOData //This parameter is represented from Note2 #define void IOWriteByte(byte IOPort, byte Value);...
  • Page 91 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 ************************************************************************************ Main VOID // Procedure : AaeonWDTConfig // (byte)Timer : Time of WDT timer.(0x00~0xFF) // (boolean)Unit : Select time unit(0: second, 1: minute).
  • Page 92 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 ************************************************************************************ // Procedure : AaeonWDTEnable AaeonWDTEnable () VOID WDTEnableDisable( EnableLDN, EnableReg, EnableBit, 1 // Procedure : AaeonWDTConfig AaeonWDTConfig () VOID // Disable WDT counting...
  • Page 93 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 ************************************************************************************ SIOEnterMBPnPMode() VOID IOWriteByte(SIOIndex, 0x87); IOWriteByte(SIOIndex, 0x87); SIOExitMBPnPMode() VOID IOWriteByte(SIOIndex, 0xAA); SIOSelectLDN(byte LDN) VOID IOWriteByte(SIOIndex, 0x07);...

  • Page 94: Appendix B I/O Information

    E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 Appendix I/O Information Appendix B I/O Information...

  • Page 95: I/O Address Map

    E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 B.1 I/O Address Map Appendix B I/O Information...
  • Page 96 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 Appendix B I/O Information...

  • Page 97: Memory Address Map

    E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 B.2 Memory Address Map Appendix B I/O Information...

  • Page 98: Irq Mapping Chart

    E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 B.3 IRQ Mapping Chart Appendix B I/O Information...
  • Page 99 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 Appendix B I/O Information...

  • Page 100: Dma Channel Assignments

    E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 B.4 DMA Channel Assignments Appendix B I/O Information...

  • Page 101: Appendix C Raid & Ahci Settings

    E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 Appendix RAID & AHCI Settings Appendix C RAID & AHCI Settings...

  • Page 102: Setting Raid

    E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 C.1 Setting RAID OS installation to setup RAID Mode Step 1: Copy the files below from “Driver CD ->Step 6 - RAID&AHCI” to Disk Step 2: Connect the USB Floppy (disk with RAID files) to the board Appendix C RAID &...
  • Page 103 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 Step 3: The setting procedures “ In BIOS Setup Menu” A: Advanced -> SATA Configuration -> SATA Mode -> RAID Mode Step 4: The setting procedures “In BIOS Setup Menu”...
  • Page 104 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 Step 5: The setting procedures “In BIOS Setup Menu” C: Boot -> Boot Option #1 -> DVD-ROM Type Step 6: The setting procedures “In BIOS Setup Menu”...
  • Page 105 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 Step 7: Press Ctrl-I to enter MAIN MENU Step 8: Choose “1.Create RAID Volume” Appendix C RAID &...
  • Page 106 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 Step 9: RAID Level -> RAID0(Stripe) Step 10: Choose “Create Volume” Appendix C RAID & AHCI Settings...
  • Page 107 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 Step 11: Choose “Y” Step 12: Choose “5. Exit” Appendix C RAID & AHCI Settings...
  • Page 108 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 Step 13: Choose “Y” Step 14: Setup OS Appendix C RAID & AHCI Settings...
  • Page 109 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 Step 15: Press “F6” Step 16: Choose “S” Appendix C RAID & AHCI Settings...
  • Page 110 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 Step 17: Choose “Intel(R) Mobile Express Chipset SATA RAID Controller” Step 18: It will show the model number you select and then press “ENTER” C-10 Appendix C RAID &...
  • Page 111 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 Step 19: Setup is starting Windows C-11 Appendix C RAID & AHCI Settings...

  • Page 112: Setting Ahci

    E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 C.2 Setting AHCI OS installation to setup AHCI Mode Step 1: Copy the files below from “Driver CD ->Step 6 - RAID&AHCI” to Disk Step 2: Connect the USB Floppy (disk with AHCI files) to the board C-12...
  • Page 113 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 Step 3: The setting procedures “ In BIOS Setup Menu” A: Advanced -> SATA Configuration -> SATA Configuration -> SATA Mode ->...
  • Page 114 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 Step 5: The setting procedures “In BIOS Setup Menu” C: Save & Exit -> Save Changes and Exit Step 6: Setup OS C-14 Appendix C RAID &...
  • Page 115 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 Step 7: Press “F6” Step 8: Choose “S” C-15 Appendix C RAID & AHCI Settings...
  • Page 116 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 Step 9: Choose “Intel(R) 7 Series Chipset Family SATA AHCI Controller” Step 10: It will show the model number you select and then press “ENTER” C-16 Appendix C RAID &...
  • Page 117 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 Step 11: Setup is loading files C-17 Appendix C RAID & AHCI Settings...

  • Page 118: Appendix D Electrical Specifications For I/O Ports

    E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 Appendix Electrical Specifications for I/O Ports Appendix D Electrical Specifications for I/O Ports...

  • Page 119: Dio Programming

    E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 D.1 DIO Programming AEC-6950 utilizes FINTEK 81866 chipset as its Digital I/O controller. Below are the procedures to complete its configuration and the AAEON initial watchdog timer program is also attached based on which you can develop customized program to fit your application.

  • Page 120: Digital I/O Register

    E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 D.2 Digital I/O Register Table 1 : SuperIO relative register table Default Value Note SIO MB PnP Mode Index Register Index 0x2E...

  • Page 121: Digital I/O Sample Program

    E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 D.3 Digital I/O Sample Program ************************************************************************************ // SuperIO relative definition (Please reference to Table 1) #define byte SIOIndex //This parameter is represented from Note1 #define byte SIOData //This parameter is represented from Note2 #define void IOWriteByte(byte IOPort, byte Value);...
  • Page 122 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 ************************************************************************************ // Digital Output control relative definition (Please reference to Table 3) #define byte DOutput1LDN // This parameter is represented from Note27 #define byte DOutput1Reg // This parameter is represented from Note28 #define byte DOutput1Bit // This parameter is represented from Note29 #define byte DOutput1Val // This parameter is represented from Note30...
  • Page 123 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 ************************************************************************************ Main VOID Boolean PinStatus ; // Procedure : AaeonReadPinStatus // Input : Example, Read Digital I/O Pin 3 status // Output : InputStatus : 0: Digital I/O Pin level is low...
  • Page 124 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 ************************************************************************************ AaeonReadPinStatus(byte LDN, byte Register, byte BitNum) Boolean Boolean PinStatus ; PinStatus = SIOBitRead(LDN, Register, BitNum); Return PinStatus ;...
  • Page 125 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 ************************************************************************************ SIOEnterMBPnPMode() VOID IOWriteByte(SIOIndex, 0x87); IOWriteByte(SIOIndex, 0x87); SIOExitMBPnPMode() VOID IOWriteByte(SIOIndex, 0xAA); SIOSelectLDN(byte LDN) VOID IOWriteByte(SIOIndex, 0x07);...
  • Page 126 E m b e d d e d C o n t r o l l e r A E C - 6 9 5 0 ************************************************************************************ SIOBitRead(byte LDN, byte Register, byte BitNum) Boolean Byte TmpValue; SIOEnterMBPnPMode(); SIOSelectLDN(LDN); IOWriteByte(SIOIndex, Register); TmpValue = IOReadByte(SIOData);...

Table of Contents