Aaeon AEC-6402 Manual
  1. Manuals
  2. Brands
  3. Aaeon Manuals
  4. Controller
  5. AEC-6402
  6. Manual

Aaeon AEC-6402 Manual

Embedded controller
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
E m b e d d e d C o n t r o l l e r
A E C - 6 4 0 2
AEC-6402
Embedded Controller
®
Intel
Atom™ N2600 1.6GHz Processor
2 USB2.0, 2 COM, 1 Mini-HDMI
1 CANBus, 1 mSATA
st
AEC-6402 Manual 1
Ed.
April 25, 2014

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AEC-6402 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Aaeon AEC-6402

Summary of Contents for Aaeon AEC-6402

  • Page 1 E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 AEC-6402 Embedded Controller ® Intel Atom™ N2600 1.6GHz Processor 2 USB2.0, 2 COM, 1 Mini-HDMI 1 CANBus, 1 mSATA AEC-6402 Manual 1 April 25, 2014...
  • Page 2 AAEON assumes no liabilities resulting from errors or omissions in this document, or from the use of the information contained herein. AAEON reserves the right to make changes in the product design without notice to its users.
  • Page 3 E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 Acknowledgments All other products’ name or trademarks are properties of their respective owners.  AMI is a trademark of American Megatrends, Inc.
  • Page 4 E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 Packing List Before you begin operating your PC, please make sure that the following materials are enclosed:  AEC-6402 Embedded Controller  Burn-Proof Bracket  RJ-45 to Dsub cable ...
  • Page 5 E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 Safety & Warranty 1. Read these safety instructions carefully. 2. Keep this user's manual for later reference. 3.
  • Page 6 E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 The equipment does not work well, or you cannot get it to work according to the user’s manual. The equipment has been dropped and damaged.
  • Page 7 E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 Below Table for China RoHS Requirements 产品中有毒有害物质或元素名称及含量 AAEON Boxer/ Industrial System 有毒有害物质或元素 部件名称 铅...

  • Page 8: Table Of Contents

    1.1 Introduction ..............1-2 1.2 Features ..............1-3 1.3 Specifications ............1-4 Chapter 2 Hardware Installation 2.1 Dimension and I/O of AEC-6402 ....... 2-2 2.2 List of Jumpers ............2-3 2.3 List of Connectors ............. 2-3 2.4 Clear CMOS Jumper (JP2) ........2-4 2.5 AT/ATX Power Supply Mode Selection (JP6)
  • Page 9 E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 2.17 mSATA Mini-Card Slot (PCIEA) ......2-10 2.18 mSATA Storage Installation ........2-13 2.19 DRAM Installation ............ 2-14 2.20 Mounting Bracket&...

  • Page 10: Chapter 1 General Information

    E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 Chapter General Information 1- 1 Chapter 1 General Information...

  • Page 11: Introduction

    AEC-6402, not even Pico-ITX system. With this tiny dimension form factor, customers can fit it almost everywhere, and it provides quite a lot of I/O ports for basic applications. AEC-6402 adopts fanless design for high reliability to fit in most rugged environment. It also provides wireless communication features and it’s really convenient...

  • Page 12: Features

    E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 1.2 Features ®  Intel Atom N2600 1.6 GHz Processor ®  Intel NM10 Express chipset ...

  • Page 13: Specifications

    E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 1.3 Specifications ®  CPU Intel Atom™ N2600 1.6 GHz ®  Chipset Intel NM10 ...
  • Page 14 E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 Others DC-jack w/ lock for power input  Expansion － Mini Card － Mini PCI Others Onboard USB Pin header x 2 ...
  • Page 15 E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 ® ®  OS Support Windows XP Embedded, Windows ® ® XP, Windows 7, Windows Embedded Standard 7 1- 6...

  • Page 16: Chapter 2 Hardware Installation

    E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 Chapter Hardware Installation Chapter 2 Hardware Installation...

  • Page 17: Dimension And I/O Of Aec-6402

    E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 2.1 Dimension and I/O of AEC-6402 2 - 2 Chapter 2 Hardware Installation...

  • Page 18: List Of Jumpers

    E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 2.2 List of Jumpers The board has a number of jumpers that allow you to configure your system to suit your application.

  • Page 19: Clear Cmos Jumper (Jp2)

    E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 2.4 Clear CMOS Jumper (JP2) 1 2 3 1 2 3 Normal (Default) Clear CMOS Function Normal (Default) Clear CMOS...

  • Page 20: Lpc Port (Cn10)

    E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 2.7 LPC Port (CN10) LAD0 LAD1 LAD2 LAD3 +3.3V LFRAME# LRESET# LCLK LDRQ0 LDRQ1 SERIRQ Pin Name Signal Type...

  • Page 21: Can Bus Port (Cn11)

    E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 LDRQ1 SERIRQ +3.3V 2.8 CAN BUS Port (CN11) Pin Name Signal Type Signal Level CAN0H DIFF CAN0L...

  • Page 22: Realtek Lan (Rj-45) Port (Cn13)

    E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 MDI3- DIFF 2.10 Realtek LAN (RJ-45) Port (CN13 ) Pin Name Signal Type Signal Level MDI0+ DIFF MDI0-...

  • Page 23: Cn22)

    E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 HDMI_TX2+ DIFF HDMI_TX2- DIFF HDMI_TX1+ DIFF HDMI_TX1- DIFF HDMI_TX0+ DIFF HDMI_TX0- DIFF HDMI_CLK+ DIFF HDMI_CLK- DIFF HDMI_DDC_CLK...

  • Page 24: Usb 2.0 Port 1 (Cn25)

    E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 RS-232 RS-422 RS-485 DATA+ DATA- 2.13 USB 2.0 Port 1 (CN25) Pin Name Signal Type Signal Level USB4_D- DIFF...

  • Page 25: Usb 2.0 Port 3 (Cn27)

    E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 2.15 USB 2.0 Port 3 (CN27) Pin Name Signal Type Signal Level USB5_D- DIFF USB5_D+ DIFF WIR_DIS...
  • Page 26 E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 mSATA_RX+ DIFF +3.3V +3.3V mSATA_RX- DIFF +1.5V +1.5V SMB_CLK +3.3V mSATA_TX DIFF 2 - 11 Chapter 2 Hardware Installation...
  • Page 27 E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 SMB_DATA +3.3V mSATA_TX+ DIFF +3.3V +3.3V +3.3V +3.3V +1.5V +1.5V +3.3V +3.3V 2 - 12 Chapter 2 Hardware Installation...

  • Page 28: Msata Storage Installation

    E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 2.18 mSATA Storage Installation Step 1: Remove the 4pcs M2*4 screws in the bottom case. Step 2: Install the mSATA module (screw in 2 pcs M2 x 3).

  • Page 29: Dram Installation

    E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 2.19 DRAM Installation Step 1: Remove the 4pcs M2*4 screws in the bottom case. Step 2: Install the DRAM module.

  • Page 30: Mounting Bracket& Burn-Proof Bracket Installation

    E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 2.20 Mounting Bracket& burn-Proof bracket installation  Mounting bracket is the middle device for DIN-RAIL & VESA-Mount. ...
  • Page 31 E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 Step 3: Then fasten the screws and install both the Mounting Bracket and Burn-Proof bracket as the following graphics show. Step 4: The installation complete photo is shown below.

  • Page 32: Din-Rail Bracket Installation

    E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 2.21 DIN-RAIL bracket Installation Step 1: First, please install the Mounting Bracket and Burn-proof bracket as the above section 2.4 shows.

  • Page 33: Vesa-Mount Bracket Installation (For Display Panels)

    2.4 shows. Then start to install the VESA-Mount bracket for Display Panels. Step 2: Align the AEC-6402 with the VESA-Mount bracket through the rail. Then smoothly push the AEC-6402 to fit in the bracket. 2 - 18...
  • Page 34 E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 Step 3: The installation complete photos are shown below. Bottom View Top View 2 - 19 Chapter 2 Hardware Installation...
  • Page 35 E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 Chapter BIOS Setup Chapter 3 AMI BIOS Setup 3-1...

  • Page 36: System Test And Initialization

    4. The CMOS memory has lost power and the configuration information has been erased. The AEC-6402 CMOS memory has an integral lithium battery backup for data retention. However, you will need to replace the Chapter 3 AMI BIOS Setup 3-2...

  • Page 37: Ami Bios Setup

    E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 complete unit when it finally runs down. 3.2 AMI BIOS Setup AMI BIOS ROM has a built-in Setup program that allows users to modify the basic system configuration.
  • Page 38 E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 Setup Menu Setup submenu: Main Options summary: (default setting) System Date Day MM:DD:YYYY Change the month, year and century. The ‘Day’ is changed automatically. System Time HH : MM : SS Change the clock of the system.
  • Page 39 E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 Setup submenu: Advanced Options summary: (default setting) ACPI Settings System ACPI Parameters CPU Configuration CPU Configuration Parameters IDE Configuration IDE Device Options Settings...
  • Page 40 E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 System Super IO Parameters H/W Monitor Monitor hardware status Chapter 3 AMI BIOS Setup 3-6...
  • Page 41 E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 ACPI Settings Options summary: (default setting) Enabled Enable Hibernation Disabled Enabled or disabled hibernate (OS/S4 Sleep State). Suspend Disabled S1 only(CPU Stop Clock) ACPI Sleep State...
  • Page 42 E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 RTC Wake Settings Options summary: (default setting) Wake system with Fixed Disabled Time Enabled Enable or disable System wake on alarm event.
  • Page 43 E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 Wake up minute 0-59 Wake up second 0-59 Wake system with Disabled Dynamic Time Enabled Enable or disable System wake on alarm event.
  • Page 44 E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 CPU Configuration Options summary: (default setting) Hyper-Threading Disabled Enabled En/Disable CPU Hyper-Threading function Execute Disable Bit Disabled Enabled En/Disable XD bit for supporting OS...
  • Page 45 E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 CPU will reduce frequency automatically when CPU temperature higher than the setting value. Chapter 3 AMI BIOS Setup 3-11...
  • Page 46 E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 IDE Configuration Options summary: (default setting) SATA Controller(s) Disabled Enabled En/Disable SATA controller Configure SATA as AHCI Configure SATA controller operating as IDE/AHCI mode.
  • Page 47 E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 USB Configuration Options summary: (default setting) Legacy USB Support Enabled Disabled Auto Enables BIOS Support for Legacy USB Support. When enabled, USB can be functional in legacy environment like DOS.
  • Page 48 E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 Forced FDD Hard Disk CD-ROM If Auto. USB devices less than 530MB will be emulated as Floppy and remaining as Floppy and remaining as hard drive.
  • Page 49 E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 F81801 Super IO Configuration Options summary: (default setting) Serial Port 1/2 Configuration Set Parameters of Serial Port 1/2 Chapter 3 AMI BIOS Setup 3-15...
  • Page 50 E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 Serial Port 1 Configuration Options summary: (default setting) Serial Port Disabled Enabled En/Disable specified serial port. Change Settings Auto IO=3F8h;...
  • Page 51 E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 Select a resource setting for Super IO device. Device Type RS232 RS422 RS485 Configure COM2 operated as RS232, RS422 or RS485. Chapter 3 AMI BIOS Setup 3-17...
  • Page 52 E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 Serial Port 2 Configuration Options summary: (default setting) Serial Port Disabled Enabled En/Disable specified serial port. Change Settings Auto IO=2F8h;...
  • Page 53 E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 Select a resource setting for Super IO device. Device Type RS232 RS422 RS485 Configure COM2 operated as RS232, RS422 or RS485. Chapter 3 AMI BIOS Setup 3-19...
  • Page 54 E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 H/W Monitor Chapter 3 AMI BIOS Setup 3-20...
  • Page 55 E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 Setup submenu: Chipset Options summary: (default setting) Host Bridge Host Bridge Parameters South Bridge South Bridge Parameters Chapter 3 AMI BIOS Setup 3-21...
  • Page 56 E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 Host Bridge Options summary: (default setting) Fixed Graphics Memory 128MB Size 256MB Configure Fixed Graphics Memory Size Chapter 3 AMI BIOS Setup 3-22...
  • Page 57 E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 South Bridge Options summary: (default setting) Onboard Devices Onboard devices parameters configurations High Precision Timer Enabled Disabled Enable or Disable the High Precision Event Timer...
  • Page 58 E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 3-4 Seconds 4-5 Seconds Select a minimum assertion width of the SLP_S4# signal Restore AC Power Loss Power On Power Off Last State Select AC power state when power is re-applied after a power failure.
  • Page 59 E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 Onboard Devices Options summary: (default setting) Azalia Controller Disabled HD Audio Enable or disable Azalia Controller LAN1 Controller Disabled Enabled...
  • Page 60 E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 SMBus Controller Disabled Enabled Enable or Disable OnChip SMBus Controller Chapter 3 AMI BIOS Setup 3-26...
  • Page 61 E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 Setup submenu: Boot Options summary: (default setting) Quiet Boot Disabled Enabled En/Disable showing boot logo. Launch LAN PXE OpROM Disabled Enabled En/Disable PXE boot for RTL8111E LAN...
  • Page 62 E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 BBS Priorities Options summary: (default setting) Boot Option #x Disabled Device name Sets the system boot order Chapter 3 AMI BIOS Setup 3-28...
  • Page 63 E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 Setup submenu: Security Options summary: (default setting) Administrator Password/ Not set User Password You can install a Supervisor password, and if you install a supervisor password, you can then install a user password.
  • Page 64 E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 required at boot time, or when the user enters the Setup utility. Removing the Password: Highlight this item and type in the current password.
  • Page 65 E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 HDD Security Options summary: (default setting) Set User Password/ Not set Set Master Password You can install a Master and User password.
  • Page 66 E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 required at boot time, or when the user enters the Setup utility. Removing the Password: Highlight this item and type in the current password.
  • Page 67 E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 Setup submenu: Exit Options summary: (default setting) Save Changes and Reset Reset the system after saving the changes Discard Changes and Reset Reset system setup without saving any changes Restore Defaults...

  • Page 68: Chapter 4 Driver Installation

    E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 Chapter D river Installation 4 -1 Chapter 4 Driver Installation...
  • Page 69 E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 The AEC-6402 comes with an AutoRun CD-ROM that contains all drivers and utilities that can help you to install the driver automatically.
  • Page 70 E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 4.1 Installation: Insert the AEC-6402 CD-ROM into the CD-ROM drive. And install the drivers from Step 1 to Step 7 in order. Step 1 – Install Chipset Driver 1.
  • Page 71 E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 2. Install IEMGD  Double click on the WindowsDriverSETUP.exe  Select the configuration  Follow the instructions that the window shows ...
  • Page 72 E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 4 -5 Chapter 4 Driver Installation...
  • Page 73 E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 If you want to update driver, please uninstall driver first. Uninstall IEMGD 1. Double click on the WindowsDriverSETUP.exe 2.
  • Page 74 E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 Step 5 – Serial Port Driver (Optional) ® For Windows Click on the STEP5-Serial Port Driver (Optional) and select the folder of WINXP_32 Double click on patch.bat file Follow the instructions that the window shows...
  • Page 75 E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 Change User Account Control Settings to [Never notify] Reboot and Administrator login. 4 -8 Chapter 4 Driver Installation...
  • Page 76 E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 To run patch.bat with [Run as administrator]. Step 6 – Install Wireless Driver (Optional) Click on the STEP6-Wireless (Optional) folder and select the OS folder your system is.
  • Page 77 E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 Follow the instructions that the window shows The system will help you install the driver automatically 4 -10 Chapter 4 Driver Installation...

  • Page 78: Appendix A Programming The Watchdog Timer

    E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 Appendix Programming the Watchdog Timer Appendix A Programming the Watchdog Timer A-1...

  • Page 79: Watchdog Timer Registers

    E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 A.1 Watchdog Timer Registers Table 1 : Watch dog relative IO address Default Value Note I/O Base I/O Base address for Watchdog operation.

  • Page 80: Watchdog Sample Program

    E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 A.2 WatchDog Sample Program ************************************************************************** **** // WDT I/O operation relative definition (Please reference to Table 1) #define WDTAddr 0xA00 // WDT I/O base address Void WDTWriteByte(byte Register, byte Value);...
  • Page 81 E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 // Procedure : AaeonWDTEnable // This procudure will enable the WDT counting. AaeonWDTEnable(); ************************************************************************** ***** ************************************************************************** *****...
  • Page 82 E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 // WDT output mode set to pulse WDTSetBit( TimerReg, ModeBit, ModeVal // WDT output mode set to active low WDTSetBit( TimerReg, PolarityBit, PolarityVal // WDT output pulse width is 25ms...

  • Page 83: Appendix B I/O Information

    E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 Appendix I/O Information Appendix B I/O Information...

  • Page 84: I/O Address Map

    E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 D.1 I/O Address Map Appendix B I/O Information...
  • Page 85 E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 Appendix B I/O Information...

  • Page 86: Memory Address Map

    E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 D.2 Memory Address Map Appendix B I/O Information...

  • Page 87: Irq Mapping Chart

    E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 D.3 IRQ Mapping Chart Appendix B I/O Information...
  • Page 88 E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 Appendix B I/O Information...

  • Page 89: Dma Channel Assignments

    E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 D.4 DMA Channel Assignments Appendix B I/O Information...

  • Page 90: Appendix C Ahci Setting

    E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 Appendix AHCI Setting Appendix C AHCI Setting...

  • Page 91: Setting Ahci

    E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 C.1 Setting AHCI OS installation to setup AHCI Mode. Step 1: Copy the files below from “Driver CD -> STEP5-AHCI\WIN7_32\F6 Install Floppy Create for 32 and 64 bit Windows”...
  • Page 92 E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 Step 3: Press “F6” Step 4: Choose “S” Appendix C AHCI Setting...
  • Page 93 E m b e d d e d C o n t r o l l e r A E C - 6 4 0 2 Step 5: Choose “Intel® NM10 Express Chipset” Step 6: It will show the model number you select and then press “ENTER Step 7: Setup is loading files Appendix C AHCI Setting...

Table of Contents