Enable Email Alar
The email Alarm can email a warning message while it is detecting an
alarm event. Follow the instructions below to set the Email Alarm.
1. Select alarm types of cameras, DI, Disk Full, Disk Failure, or No signal.
2. Select Alarm Trigger Period.
3. Click Email tab.
4. Enter the Email Address.
5. Enter the Title.
6. Adjust the "Send" parameter as desired to specify the number of seconds of
video you'd like to send by email.(1~5 seconds)
7. Click "Attach playback program" for attaching the playback program(1.78MB)
in the email. It is for users to playback the recording video when there is no
playback program.
8. Click "Add" button to add this configuration in the below list.
9. Click "Apply" or "OK" to save the configuration.
38
Pic6-8: Email Alarm