Enable Sound Alarm
Activating the Alarm Sound parameter enables sounding of the alarm at
the time of alarm condition detection. Follow the instructions below to set the
Sound Alarm.
. Select alarm types of cameras, DI, Disk
Full, Disk Failure, or No signal.
2. Click Enable or Enable Trigger Period
3. Click Sound tab
4. Click Select to choose alarm sound
from the sound list window
5. Choose a .wav file from the above window and click "OK"
6. Click Play to play the file
7. Select how many times you would like to repeat the alarm sound (up to 0
times)
8. Click "Add" button to add this configuration in the below list
9. Click "Apply" or "OK" to save the configuration.
34
Pic6-3: Select an alarm sound.
Pic6-4: Sound Alarm