Aaeon AVR-3000 User Manual page 53

Enable Fax Alarm
The Fax Alarm allows a fax warning message to be sent while it is
detecting an alarm event. Follow the instructions below to set the Fax Alarm.
1. Select alarm types of cameras, DI, Disk Full, Disk Failure, or No signal.
2. Select Alarm Trigger Period.
3. Click Fax tab.
4. Enter the fax number. (Add the area code when it is a long distance call)
5. Choose from the "Send" drop-down list how many pictures to be sent.(-30
pictures)
6. Click "Add" button to add this configuration in the below list.
7. Click "Apply" or "OK" to save the configuration.
Chapter 6
Pic6-7: Fax Alarm
37