Aaeon AVR-3000 User Manual page 63

PTZ Types
. Select the brand name of PTZ.
2. Select the Baud rate.
3. The PTZ camera ID number may differ from the number shown on the
screen; should this occur, please set the camera number to be the same as
the PTZ ID to enable the user to control PTZ camera.
Note: If the PTZ device Baud rate setting
does not match the corresponding Baud rate
setting of the DVR, then the device will most
likely not function correctly.
Adjusting Direction of PTZ
1. Select the level (0-7) to set the speed of
PTZ when moving its direction.
2. Click the arrow icons to control PTZ's
direction.
3. Click
zoom out.
Adjusting Focus of PTZ
Use to focus-in,
out, and
automatically adjusted.
to zoom in, and click
to focus-
to have the camera
Pic10-2: Select PTZ Type
to
Pic10-3: Adjust PTZ's derection
Chapter 10
Pic10-4: Adjust Focus
47