Account Settings
The Account Settings area allows the administrator of the DVR to add
users to the system. There are two types of users, one is the Supervisor,
and the other one is Normal User. The Supervisor of the DVR system can
not only make use of all the functions locally and remotely, but also has the
authority to manage normal users. A Normal User does not have supervisory
rights and is limited to the certain user functionality of the DVR system.
Follow these few steps to create or configure users for the DVR system.
. Click the "Setup" icon on the main monitoring page
2. Click "Account" tab.
3. Type in the name(up to 8 digits) of the user followed by a specified password.
4. Type in the password once again in the ReType field to reconfirm.
5. Click the checkbox next to Enable to select the user's type and authority.
6. Select "Supervisor" to give user total control over the machine or "Normal" to
limit the user's access.
7. The "Access Permission" must be selected following the creation of each
"Normal" user.
a. Click the checkbox next to "Local" to give the user local access to the
DVR host. (Local access means users are able to access the DVR
directly.)
b. Click the checkbox next to "Remote" to give the user remote access.
(Remote access means users are able to access the DVR over the local
LAN or Internet.) Select which cameras you would like the user to access
by clicking the checkbox next to the camera number.
20
Chapter 4
Pic4-1: Account setup