1. Click the "NTP" button
2. Fill in the "NTP Server" and click the "Add" button to put the NTP server
into the list. DVR can have their own time server added for keeping DVR
synchronized. (Several NTP servers have been added by default)
3. Active: Active the selected NTP server.
4. Deactive: Not to active the selected NTP server.
5. Delete: Delete the selected NTP server in the list.
6. Sync Period: Click the Hourly, Daily, Weekly, or Monthly, you can have DVR
be timed every hour, day, week, or month.
7. Time Adjust: manually correct the clock on NAS.
8. Log: Keep track on the status of every time correction.
9. Save: Save all configurations.
Note: DVR will only connect with the top one acted NTP server on the list, but if the
connection failed, DVR will connect the second one and so on.
Audio
The DVR system supports up to 8-CH audio recording which depends
on its hardware requirements. This provides audio recording and audio
playback via built-in audio device of motherboard.
. Click "Sound" button
28
Pic5-6: NTP Setup