Enable Voice Alarm
The Voice Alarm setting will provide a voice warning message to users
at the time of detecting the alarm condition. Follow the instructions below to
set the Voice Alarm.
1. Select alarm types of cameras, DI, Disk Full, Disk Failure, or No signal.
2. Select Alarm Trigger Period
3. Click Voice tab and type in the "Telephone Number"; specify the area code if
it is a long distance call, and if an extension number is required, please add
",,," followed by the extension number.(Up to 14 digits)
4. "Delay" seconds means how many seconds you'd like to delay before the
Voice Alarm is activated. A period of to 0 seconds may be set.
5. "Repeat Times" is used to set the number of times you'd like to trigger the
alarm; to 0 times can be set.
6. Click "Add" button to add this configuration in the below list
7. Click "Apply" or "OK" to save the configuration.
36
Pic6-6: Voice Alarm