Table of Contents
Advertisement
Tether Anchor Loop
(Located beneath the forward facing
dinette seat back cushion)
NOTE: The dinette table must be in the lowered
position when a child seat is in use.
2
1. Lower the dinette table.
2. Hook the Tether to the Anchor Loop. Pull
tether strap to tighten.
3. Fasten the lap belt and pull snug.
-Typical View,
(Your motorhome may differ in appearance)
Further Information
See the child seat manufacturer's specific
instructions for proper attachment and
adjustment of the tether and seat belts.
1
3
DRIVING YOUR MOTORHOME
COLLISION AVOIDANCE
SYSTEM
The collision avoidance system in your
vehicle is chassis-supplied. Refer to the chassis
manual for complete features, programming, and
operating instructions.
KEYS
Your motorhome is supplied with several
keys. In addition to the chassis manufacturer's
ignition key, you receive keys for the entrance
door and exterior compartment doors.
Keys have an identification number, either a
small metal tag or stamped into the key head.
These numbers are recorded on the vehicle's
component model/serial sheet, which is included
in your InfoCase. In case keys are lost or stolen,
your dealer or a locksmith can provide you with
duplicate keys or modify the locks.
HAZARD WARNING FLASHERS
The hazard warning flashers provide
additional safety when the vehicle must be
stopped on the side of the roadway and presents a
possible hazard to other motorists. When the
flashers are on, it serves as a warning to other
drivers.
Further Information
Refer to the chassis manual provided in your
InfoCase for instructions on activating,
operating, and canceling hazard warning
flashers.
AIR CONDITIONER/HEATER –
AUTOMOTIVE (DASH)
See the chassis manual for operating
information on driver and passenger comfort
controls – air conditioner, heater, defroster, and
ventilation.
NOTE: The dash air conditioner is not designed
to cool the entire interior of the
motorhome, but is intended only to
provide cooling for the cab area.
SECTION 3 –
3-3
Advertisement
Table of Contents
