Deleting Groups; Adding Users; Configuring Radius Proxy - Symbol WS5000 Series System Reference Manual

Close
Help

5.3.2 Deleting Groups

To remove a group, select the group from the table and click the
displays when applying the change if there are users still assigned to the group. You can remove the group
from each user or add the group back to the group list.

5.3.3 Adding Users

The Users table displays the entire list of users. Up to 100 users can be entered. Users are listed in the order
they are added. Although users can be added and deleted, there is no capability to edit the name of a group.
1. To add a new user, click the
2. In the new line, type a
3. Click the Password
OK to return to the Users screen.
4. Click the List of Groups
a user. A user is required to belong to at least one group in order for the user to have access to the
switch.
• To add the user to a group, select the group from the list of groups (on the right) and click the
button.
• To remove the user from a group, select the group in the Assigned list (on the left) and click the
Del (Delete) button.
5. Click OK when you are done.
6. Click one of the following buttons in the screen:
Apply
Undo
Cancel
Help

5.4 Configuring Radius Proxy

The Radius server can proxy the authentication requests to a remote radius based on the suffix of the user id.
Figure 5.9 shows the Radius proxy configuration screen.
Exits the applet and terminate this session
Displays the online help.
Add button at the bottom of the Users area.
User ID (username).
table header. A small window displays. Enter a password for the user and click
table header. A new screen displays enabling you to associate groups with
Saves your changes
Closes the screen without saving your changes. This reverts
the screen back to the last saved configuration.
Exits the applet and terminate this session
Displays the online help.
Configuring User Authentication
Del (Delete) button. A warning message
5-13
Add