Listening To An Aux Input Source - Kenwood HM-DV5 Instruction Manual

Listening to an AUX input source

Connect the related equipment under reference to "Connection of external source component"
1
Press the AUX key.
2
Play the connected equipment.
3
Adjust the volume.
VOLUME/
MULTI CONTROL
Adjusting the AUX Input Level
This adjusts the input level for the external equipment (video deck etc.) connected to the AUDIO CD-R
IN(AUDIO AUX IN) terminal. Adjust so that the volume of the AUX input source sounds at an equivalent
level to the CD. (Main unit operation only)
1
Press the AUX key. (Select the "CD-R" or
"AUX" input)
2
Press the MODE key.
3
Turn the VOLUME/MULTI CONTROL knob
to select "INPUT LEVEL", then press the
SET/ DEMO key.
VOLUME/
MULTI CONTROL
4
Adjust the input level.
VOLUME/
MULTI CONTROL
The level
decreases
5
Set it.
SET/DEMO
AUX
AUX
MODE
SET/DEMO
\
The level
increases
Each press switch the modes as follows.
1 "CD-R" (Analog)
2 "AUX" (Analog)
Each press switch the modes as follows.
1 "CD-R" (Analog)
2 "AUX" (Analog)
I N P U T
C D R I N P U T + 1
÷ Adjustment is possible over the range from - 4 to + 3.
55
Timer operation
9
L E V E L
Input level