Listening To An Aux Input Source - Kenwood HM-636 Instruction Manual

Listening to an AUX input source

1
Select AUX (external input).
2
Play the connected equipment.
3
Adjust the volume.
Adjusting the AUX Input Level
This adjusts the input level for the external equipment (video deck etc.) connected to the AUX input termi-
nal. Adjust so that the volume of the AUX input source sounds at an equivalent level to the CD.
1
Press the AUX key.
2
Select "INPUT
\
\
(Press the set/demo key while the "?" mark is
blinking.)
3
Adjust the input level.
The level
decreases
4
Set it.
36
EN
?".
\
\
The level
increases
Each press switches the display contents.
"TAPE RVS"
"INPUT
"TIMER
"TIME ADJUST
"APS
÷ Adjustment is possible from the range of - 3 to + 2.
÷ Adjusting the input level control also varies the record-
ing level from the input source connected to the AUX
input jacks.
Timer operation
?"
?"
?"
?"
Input level