Connecting The Ac Power Cord For A Psr150-A1 Power Module - H3C S5130-HI Series Installation Manual

Figure 40 Connecting a DC power cord for the fixed DC power module
Connecting the AC power cord for a PSR150-A1 power
module
To connect the AC power cord for a PSR150-A1 power module:
Wear an ESD wrist strap and make sure it makes good skin contact and is reliably grounded.
1.
Attach the hooks of the bail latch (supplied with the power module) into the two holes next to the
2.
power receptacle on the power module, and pull the bail latch leftwards (see
Connect the female connector of the AC power cord supplied with the power module to the
3.
power receptacle (see callout 1 in
Pull the bail latch rightwards to secure the connector to the power receptacle (see callout 2
4.
in Figure
Connect the other end of the power cord to an AC power source.
5.
Figure 41 Connecting the power cord for a PSR150-A1 power module (1)
42).
Figure 42).
29
Figure 41).