Table of Contents
Advertisement
Figure2-26 Attaching the terminal block to the fixed DC power supply
Figure2-27 Securing the DC power cord to the terminal block
Connecting the power cord for a
CA-70A12/PSR75-12A/PSR150-A1 power supply
1.
Pull the bail latch leftward, as shown in Figure2-28.
2.
Connect the plug of the power cord to the power receptacle on the switch. See Figure2-29.
3.
Pull the bail latch rightward to secure the plug to the power receptacle. See Figure2-29.
4.
Connect the other end of the power cord to a power source.
5.
For a CA-70A12 or PSR150-A1 power supply, connect the power cord to an AC power source.
For a PSR75-12A power supply, connect the power cord to an AC power source or a 240V
high-voltage DC power source.
2-26
2
1
2
1
Advertisement
Table of Contents
