Table of Contents
Advertisement
Figure 21.
Step 1—Unlocking the Bracket
2
Remove the bracket as shown in
Figure 22.
Step 2—Removing the Bracket
3
Attach the universal mounting bracket to the junction box as shown in
Place the universal mounting bracket against the junction box so that the two
a
screw holes face the junction box and align over the screw holes in the box.
Insert the #6-32 x 1-inch machine screws in the universal mounting bracket's
b
screw holes, and use a #2 Phillips-head screwdriver to tighten them.
Installing and connecting a Series 2332 Access Point 47
Figure 22 on page
47.
Avaya WLAN Series 2332 Access Point Installation Guide
Figure
23:
Advertisement
Table of Contents
