Table of Contents
Advertisement
40 Installing and connecting a Series 2332 Access Point
Insert the key into the Kensington lock.
b
Insert the Kensington lock into the security slot on the AP.
c
Rotate the key right or left to secure the lock to the AP.
d
Pull on the lock to verify that it is secured to the AP.
e
Remove the key.
f
11 Lift the AP into place on the universal mounting bracket as shown in
Make sure the cable feeds properly into the ceiling as you lift the device, and does not become trapped
between the access point and the bracket.
Figure 11.
Step 11—Placing the AP on the Bracket
12 Lock the AP onto the bracket by inserting the 3-mm or 1/8-inch screwdriver into the Lock hole on the
access point as shown in
Warning!
device is fully locked onto the bracket before releasing it.
NN47250-307 (Version 02.02)
Figure
12.
To prevent possible damage to the AP, make sure the
Figure 11 on page
40.
Advertisement
Table of Contents
