Table of Contents
Advertisement
38 Installing and connecting a Series 2332 Access Point
Figure 7.
Step 5—Unlocking the Bracket
6
Remove the bracket as shown in
Figure 8.
Step 6—Removing the Bracket
7
Install the universal mounting bracket as follows onto the T-bar or T-bar clamp:
As shown in
a
clamp so that the two screw holes face downward and the two T-bar flanges face
upward and are adjacent to the T-bar edges.
NN47250-307 (Version 02.02)
Figure 8 on page
Figure
9, place the universal mounting bracket against the T-bar or
38.
Advertisement
Table of Contents
