Table of Contents
Advertisement
42 Installing and connecting a Series 2332 Access Point
Figure 13
15.9-mm (5/8-inch) T-bar.
Figure 13.
Step 3—Installing the T-bar Clamp for a 23.9-mm (15/16-inch) T-bar
T-bar
Figure 14.
Step 3—Installing the T-bar Clamp for a 15.9-mm (5/8-inch) T-bar
T-bar
4
Unlock the universal mounting bracket from the AP by inserting the 3-mm or 1/8-inch screwdriver into
the Unlock hole on the AP as shown in
Caution!
components, do not use excessive force when inserting a tool into the Unlock or
Lock hole.
NN47250-307 (Version 02.02)
shows an example for a 23.9-mm (15/16-inch) T-bar.
T-bar clamp halves
T-bar clamp halves
To avoid damage to the AP's lock mechanism or electronic
Figure 14
Slide together
Slide together
Figure
15.
shows an example for a
Advertisement
Table of Contents
