EPOX EP-BX6 User Manual page 44

BIOS
This Mainboard supports HDD Power Down, Doze and Standby power saving
functions when using the Intel Pentium II Processor. The default is Disabled
Doze Mode: The "Doze" mode timer starts to count when no "PM events" have
occurred.
Standby Mode: When the standby mode timer times-out, it will enter the
standby mode and retain CPU at a slow working speed. The screen will be blanked
out.
Suspend Mode: This function works only when the Pentium II Processor is
installed. The timer starts to count when "System Standby" mode timer is timed
out and no "PM Events" are occurring. Valid range is from 1 minute up to 1 hour.
HDD Power Down: HDD Standby timer can be set from 1 to 15 minute(s).
Throttle Duty Cycle: Sets how much performance will be lost during a power
management mode. Default is 62.5%.
PCI/VGA Act-Monitor: Use this option if your monitor has advanced power
saving features. The default is Disabled
Enabled: Your monitor's power features will be included in power
management.
Disabled:Your monitor's power features will not be included in power
management.
Soft-Off by PWR-BTTN: Use this to select your soft-off function.
The default is Instant Off.
Instant Off:
Delay 4 Second: Turns off the system after a 4 second delay. If momentary
CPUFAN Off In Suspend: This option is used to set if the CPU fans will turn
off furing suspend mode. The default is Enabled
Enabled: The system will turn off the CPU fans furing suspend mode.
Disabled:The system will not turn off the CPU fans furing suspend mode.
Page 4-12
Turns off the system instantly.
press of button, the system will go into Suspend Mode.
Press the power botton again to take system out of Sus-
pend Mode.
EP-BX6