EPOX EP-BX6 User Manual page 50

BIOS
On-Chip Primary PCI IDE: This option turns on/off the onboard primary IDE.
The default is Enabled.
Enabled: This activates the primary PCI IDE.
Disabled: This disable sthe primary PCI IDE and frees up the resource.
On-Chip Secondary PCI IDE: This option turns on/off the onboard secondary
IDE. The default is Enabled.
Enabled: This activates the secondary PCI IDE.
Disabled: This disable sthe secondary PCI IDE and frees up the resource.
USB Keyboard Support: This controls the activation status of an optional USB
keyboard that may be attached. The default is disabled.
Enabled: Enable USB keyboard support.
Disabled: Disable USB keyboard support.
Init Display First: If multiple video cards are used this specifies which bus will
be the primary display adapter. The default is PCI Slot.
PCI Slot: PCI Video card will be primary adapter.
AGP: AGP Video card will be primary adapter.
Power On Function: There are "Button Only", "Hot Key" and "Any key" can be
chosen by this field that allows users to select one of these various functions as
Power On Method for their requirement.
The default value in this selection is " Hot Key". (Ctrl-F1)
Hot Key: User can press "Control Key" (Ctrl) and "Function Key"
(from F1 to F12) individually to power on the system.
The interval between "Ctrl" key and function Key (F1-F12)
must be short.
Anykey: Press anykey to power on the system.
Button Only: This power on method is controlled by J3 (pw-on.) Use
Power On Button to power on the system.
Password: User can Power On the System by password, the password
can be entered from 1 to 5 characters. The maximum of
password is 5 characters.
If user forget / lost the password, please go into BIOS setting to change the
Power On Method, or keyin another words as password instead of original
one.
Page 4-18
EP-BX6