EPOX EP-BX6 User Manual page 42

BIOS
Choose the "POWER MANAGEMENT SETUP" in the CMOS SETUP UTILITY to
display the following screen. This menu allows the user to modify the power
management parameters and IRQ signals. In general, these parameters should not
be changed unless it's absolutely necessary.
ACPI Function
ACPI Suspend Type
Power Management
PM Control by APM
Video off Method
Video off After
Modem Use IRQ
Doze Mode
Standby Mode
Suspend Mode
HDD Power Down
Throttle Duty Cycle
PCI/VGA Act-Monitor
Soft-off by PWR-BTTN
CPUFAN Off In Suspend : Enabled
PowerOn By Ring
Resume by Alarm
Wake Up On LAN
IRQ 8 Break Suspend
You can only change the content of Doze Mode, Standby Mode, and Suspend
Mode when the Power Management is set to 'User Define'.
ACPI Function: This option allows you to select ACPI Function.
The default is Enabled.
Enabled: Support ACPI function for new O.S
Disabled:No Support ACPI function.
ACPI Suspend Type: This item allows you to select S1(POS) or S3(STR) function.
The choice: S1(POS), S3(STR).
Power Management: Use this to select your Power Management selection.
The default is User define.
Disabled: The system operates in NORMAL conditions (Non-GREEN),
and the Power Management function is disabled.
Page 4-10
ROM PCI/ISA BIOS (2A69KPAI)
POWER MANAGEMENT SETUP
AWARD SOFTWARE, INC.
: Enabled ** Reload Global Timer Events **
: S1(POS)
: User Define IRQ [3-7, 9-15], NMI
: Yes Primary IDE 0
: V/H SYNC+Blank Primary IDE 1
: Standby Secondary IDE 0
: 3 Secondary IDE 1
: Disabled Floppy Disk
: Disabled Serial Port
: Disabled Parallel Port
: Disabled
: 62.5%
: Disabled
: Instant-off
: Enabled
Esc : Quit
: Disabled
F1 : Help
F5 : Old Values
: Enabled
F7 : Load Setup Defaults
: Disabled
Figure 5: Power Management Setup
EP-BX6
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
: Enabled
: Disabled
: Select Item
PU/PD/+/- : Modify
(Shift) F2 : Color