EPOX EP-BX6 User Manual page 43

EP-BX6
Max. saving: Maximum power savings. Inactivity period is 1 minute in
each mode.
Min. saving: Minimum power savings. Inactivity period is 1 hour in each
mode.
User define: Allows user to define PM Timers parameters to control power
saving mode.
PM controlled APM: This option shows weather or not you want the Power
Management to be controlled the Advanced Power Management (APM).
The default is Yes.
Yes: APM controls your PM
No: APM does not control your PM
Video Off Method: This option allows you to select how the video will be
disabled by the power management. The default is V/H SYNC+Blank.
V/H Sync + Blank: System turns off vertical and horizontal synchroniza-
DPMS:
Blank Screen:
Video Off After: Tells you what time frame that the video will be disabled under
current power management settings. The default is Standby.
Standby: Video powers off after time shown in standby mode setting.
Doze: Video powers off after time shown in doze mode setting.
Suspend: Video powers off after time shown in suspend mode setting.
N/A: Video power off not controlled by power management.
MODEM Use IRQ: Name the interrupt request (IRQ) line assigned to the
modem (if any) on your system. Activity of the selected IRQ always awakens the
system. Default is 3.
N/A: No IRQ is used. 3: IRQ 3
4: IRQ 4
7: IRQ 7
10: IRQ 10
tion ports and writes blanks to the video buffer.
Select this option if your monitor supports the Display
Power Management Signaling (DPMS) standard of the
Video Electronics Standards Association (VESA). Use
the software supplied for your video subsystem to
select video power management values.
System only writes blanks to the video buffer.
5: IRQ 5
9: IRQ 9
11: IRQ 11
BIOS
Page 4-11