EPOX EP-BX6 User Manual page 45

EP-BX6
PowerOn by Ring: This option is used to set the remote ring in feature. This
option is only available when Power Loss Recovery is Enabled.
The default is Enabled.
Enabled: The system can use remote ring-in to wake the system up.
Disabled: The system cannot use remote ring in to wake the system up.
Resume by Alarm: This option allows you to have the system turn on at a preset
time each day or on a certain day. This option is only available when Power Loss
Recovery is Enabled. The default is Enabled.
Enabled: The system will turn on at the preset time.
Disabled: The system can not have this function.
**Reload Global Timer Events **
These options allow the user to reset the global power features timer if any of the
enabled events occur.
IRQ [3-7, 9-15], NMI: The default is Disable.
Primary IDE 0: The default is Disable.
Primary IDE 1: The default is Disable.
Secondary IDE 0: The default is Disable.
Secondary IDE 1: The default is Disable.
Floppy Disk: The default is Disable.
Serial Port: The default is Enable.
Parallel Port: The default is Disable.
BIOS
Page 4-13