EPOX EP-BX6 User Manual page 35

EP-BX6
NOTE: If the hard disk Primary Master/Slave and Secondary Master/Slave
are set to Auto, then the hard disk size and model will be auto-
detected.
NOTE: The "Halt On:" field is used to determine when to halt the system
by the BIOS if an error occurs.
NOTE: Floppy 3 Mode support is a mode used to support a special 3.5"
drive used in Japan. This is a 3.5" disk that stores only 1.2 MB,
the default setting for this is disabled.
Selecting the "BIOS FEATURES SETUP" option in the CMOS SETUP UTILITY
menu allows users to change system related parameters in the displayed menu.
This menu shows all of the manufacturer's default values for the EP-BX6.
Pressing the [F1] key will display a help message for the selected item.
Virus Warning
CPU Internal Cache
External Cache
CPU L2 Cache ECC Checking
Processor Number Feature
Quick Power On Self Test
Boot Sequence
Boot Up Floppy Seek
Boot Up NumLock Status
Gate A20 option
Typematic Rate Setting
Typematic Rate (Chars/Sec)
Type matic Delay (Msec)
Security Option
PCI/VGA Palette Snoop
OS Select For DRAM > 64MB
Report NO FDD For WIN 95
Virus Warning: During and after the system boots up, any attempt to write to the
boot sector or partition table of the hard disk drive will halt the system and an
error message will appear.
ROM PCI/ISA BIOS(2A69KPAI)
BIOS FEATURES SETUP
AWARD SOFTWARE, INC.
: Disabled
: Enabled
: Enabled
: Disabled
: Enabled
: Enabled
: A, C, SCSI
: Enabled
: On
: Fast
: Disabled
: 6
: 250
: Setup
: Disabled
Esc : Quit
: Non-OS2
F1 : Help
: Yes
F5 : Old Values
F7 : Load Setup Defaults
Figure 3: BIOS Features Setup
BIOS
: Select Item
PU/PD/+/- : Modify
(Shift) F2 : Color
Page 4-3