Removal And Installation Of Cylinder Head - Mercedes-Benz 201.024 Service Manual

Removal and installation of cylinder head

Preceding work:
Removal of air filter (09-400).
Draining engine coolant (20-010).
Removal of guide rail in cylinder head (05340).
Fan shroud (1) and fan (75) . . . . . . . . . . . . . . . .
Cylinder head cover
Exhaust pipes (48)
Dipstick guide tube
Intake manifold strut (160) and
return spring (180)
01 0904 - 4151
(81)
(40a)
remove, install, 25 Nm (steps 1 and 2).
remove, install, with ignition cable and
distributor cover (01-406).
unbolt at exhaust manifold, bolt on, 25 Nm (step
unbolt, bolt on (step 5).
detach, attach, adjust (30-325, step 6).
at intake manifold, unbolt, bolt on, return spring,
detach, attach (steps 7 and 8).
EXIT