Removal and installation of englne
01-030
Preceding work:
Removal and installation of bottom engine compartment
Removal and installation of air filter (09-400 or 09-410).
Battery positive cable
Fan (75)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Alternator cable connector .................
Lines for pressure oil pump
Cover for evaporator .....................
Cover for engine wiring harness .............
Starter wiring harness ....................
Terminal block terminal 50 .................
Terminal 30
Engine wiring harness ....................
01.0904
disconnect, connect.
remove, install, 25 Nm.
detach (step 3).
detach, attach (step 4).
insert (step 5).
remove at component partition wall
(steps 6 and 7).
remove, install (step 8).
disconnect, connect (step 9).
disconnect, connect at terminal block (step 10).
disconnect, connect at the individual
11
connections (steps
to 18).
EXIT