Replacing Ring Gear On Flywheel - Mercedes-Benz 201.024 Service Manual

03-430

Replacing ring gear on flywheel

Preceding work:
Removing flywheel (03-410).
Ring gear (17) . . . . . . . . . , . . . . . .
Flywheel (16) .................
Flex plate (43)
Commercial accessories
Temperature measuring chalk
Colour No. 2815/220 (white) Thermochrom
03.0905 - 430/l
16
Drill old ring gear and snap open with a chisel or
heat rapidly and then remove immediately. Heat
new ring gear to 220 " C and fit onto the
flywheel immediately. Pay attention to
instruction. Lateral runout at ring gear max.
0.4 mm.
Centering collar dia. (a) for ring gear 275,31 -
Clean contact surface of ring gear at flywheel
before installation on ring gear.
This ring gear is welded on and cannot be
replaced. Replace driven member complete.
D-8504 Stein bei Nurnberg
EXIT