Removal And Installation Of Tensioner Blade - Mercedes-Benz 201.024 Service Manual

Timing case cover removed (01-210).
(21)
Timing chain and crankshaft gear
Timing chain and camshaft timing gear (4)
Chain tensioner (36 to 41)
Oil pressure pump (69)
Camshaft timing gear (4) ..................
Tensioner blade (22) .....................
Plastic support (23) . . . . . . . . . . . . . . . . . . . . .
Camshaft adjustment . . . . . . . . . . . . . . . . . . . .
05.0906 - 330/l
mark (Number 1).
mark (Number 2).
remove, install (05310).
unbolt, bolt up, put to one side with lines
connected (Number 4).
unbolt, bolt up, 80 Nm (Number 5).
remove from bearing bolt, put on.
Note
On double roller chain, spot drill bearing pin (26)
and drive out with the impact extractor
12 33 00. Install new tensioner blade with
bearing pin (Numbers 7 and 9).
check, possibly renew (Number 8).
11).
check (Number
EXIT
115
589