33 Unbolt high pressure oil pump, bolt on
(arrows) and place to the side with the lines
connected, tightening torque 25 Nm.
34 Unbolt AC compressor (425) at the
supporting bracket, bolt on, and place to the side
with lines connected. Bolts (149b), tightening
torque 25 Nm.
Unbolt bracket (b), bolt on.
35 Attach engine hoist into the suspension lug
of the engine.
Adjust engine hoist so that the engine can be
raised horizontally.
36 Disconnect all remaining lines, e. g. vacuum,
oil, fuel lines and electric cables, running to the
engine; connect.
37 Insert guard plate (arrow) between
component compartment and engine, remove.
01.0904 _ 030113
EXIT