Mercedes-Benz 201.024 Service Manual page 113

Standard im lementation: June throuah Seotember 1985
Model Engine
201.024 102.961
201.024 @ 102.985
not covered
Effective 09/89 all conrods are subject to
additonal heat treatment to prevent conrod
distortion resulting in noises when the engine
is operating at normal temperature.
Reconditioning
1 Check conrod bolts, replace if necessary
(03-310).
2 Install conrod bearing cover. To perform the
step, oil thread and bolt head contact surface
and tighten to 30 + 5 Nm.
3 Measure conrod bearing basic bore. If the
basic bore exceeds the value of 51.619 mm or is
conical, dress contact face of bearing cover on a
surface plate to max. 0.02 mm.
030905-3135
Engine End No.
transmission
Vehicle ldent End No.
EXIT