Mercedes-Benz 201.024 Service Manual page 174

5 Pull off crankshaft gear and oil pump drive
sleeve with the puller 102 589 05 33 00.
6 If the crankshaft gear is replaced, transfer
color marking from the old to the new crankshaft
gear.
7 Install crankshaft gear onto crankshaft. If this
proves difficult, knock in with the impact drift
116 589 07 15 00.
Pay attention to the straight pin for locating,
when performing this step.
8 Insert drive sleeve.
9 Insert tensioning rail.
On engines with double roller chain, insert
tensioning rail and knock in new bearing pin as
far as the stop.
10 Install camshaft gear (pay attention to color
marking), tightening torque 80 Nm.
11 Check for leaks with engine running.
EXIT
I