Introduced in Droduction: Januarv 1988
Model
Engine
201.028
Removal and installation
1
Position piston of No. 1 cylinder on ignition
TDC.
2
Marking on camshaft collar must align with
the edge on the cylinder head (arrow).
Before turning the crankshaft, switch off the
ignition and remove the plug for the inductive
sensor at the switching unit.
Caution!
Do not turn the engine by the camshaft timing
gear set bolt.
Do not turn the crankshaft backwards.
05.0906 - 220/8
Engine end number
Manual transmission
022013
Engine end number
Automatic transmission
EXIT