Table of Contents
Advertisement
Removal and installation
1
Removal and installation of Poly V- belt
(13-342).
2
Loosen lower bolt (49) for alternator
positioning.
3
Remove upper bolt
outwards (arrow).
4
Unscrew sealing plug (40) and sealing ring
(41)
and remove compression spring (39).
Caution!
Sealing plug is pressurized by the compression
spring.
5
Unbolt chain tensioner case (36) from the
cylinder crankcase with the stud driver insert.
6
The chain tensioner must be stripped down
before assembly. To do this press the setbolt
(37) and locking spring (38) out of chain
tensioner casing (36) in the direction of the
arrow. Clean parts and check for wear.
05.0906 - 31014
swing alternator
EXIT
Hide quick links:
Advertisement
Table of Contents
