Removal and installation
rocker arms
Preceding work:
Cylinder head cover removed (01-406).
Engine
Oil
pipe
(67)
Rocker arm bearing support
Special tool
05 0906 - 235/l
of rocker arm bearing supports with
61
(61)
. . . . . . . . . . . .
0 5 - 0 0 4 6 - 3 5
turn, so that rocker arm of bearing support
being removed is on base circle of cam
(cam tips pointing downwards).
remove, install (Number 2).
remove, install, 20 Nm (Number 3).
Installation note
Install ball socket (55) in original position.
Note identification number on cylinder head and
camshaft bearing cap.
EXIT