5
Unscrew dipstick guide tube at exhaust
manifold, screw in (arrow).
6
Detach Bowden cable (30) for accelerator
control, attach, press plastic guide (arrow) out of
its seat in the fulcrum lever (13) to perform this
step, and take Bowden cable (30) out of the slot
in the fulcrum lever.
Compress plastic clip (28) and push clip together
with Bowden cable to the rear through the holder
Adjust Bowden cable (30) (30-325).
7
Unbolt strut at intake manifold. To perform
this step, unbolt 2 hexagon socket bolts (arrows)
on injection engine, bolt on.
Detach return spring for throttle body assembly
(below intake manifold), attach.
01.0904 - 415/4
EXIT