Load and assign media
Load and assign media
Add temporary media to the media catalog
You can print on media that are not part of the media catalog. In the printer driver and
PRISMAprepare you can specify that the job uses temporary media and the media properties.
After the job is printed, you can add this temporary media to the media catalog in the System
view of the control panel. This is useful when you use temporary media more often. Change the
attributes of the new media with the Settings Editor.
1
2
[47] Temporary media on the control panel
For more information, see:
Media for your output on page 21
Procedure
1.
Touch [System] -> [Media].
2.
Select the media from the [Temporary media] section.
3.
Press [To catalog].
96
Chapter 4 - Plan the jobs
3
4
5
imagePRESS C800 Series