Canon imagePRESS C800 Series Operation Manual page 243

Property
Rough image align-
ment
Precise image adjust-
ment
Delivery settings
Property
Output location
Sorting method
Offset stacking
Advanced settings
Print quality settings
Property
Margin erase
Adjust color image
imagePRESS C800 Series
Job setting
[Align]
[Shift]
Job setting
[Print delivery] ->
[Output location]
[Print delivery] ->
[Sort]
[Print delivery] ->
[Offset stacking]
[Print delivery] ->
[Advanced settings]
Job setting
[Margin erase]
[Adjust image]
What you can define
Image move to corners, sides or to the middle
of a sheet
You can have more space for margins, punch
holes or staples.
• Margin shift, to define the alignment to-
wards the binding edge
• Image shift, to further define the alignment
in vertical direction
Different values for front and back sides are
possible.
What you can define
Selection of the output location
The output location must support the finishing
method.
Sorting by page or by sets
Stacking with or without an offset
Offset stacking depends on the active work-
Workflow profiles on
flow profile. (See
page 73)
• Delivery order of the sheets
• Delivery position of the sheets
• Delivery with rotation
Apply these settings for one or more finishing
optionals.
What you can define
Margin erase for one or more page edges with
a maximum of 100 mm / 3.94"
Adjustment of CMYK values on job level (See
Adjust CMYK curves for a job on page
The advanced settings enable adjustment of
CMYK curves at three control points and clip-
ping of color ranges. Save the adjustments in a
preset for later use.
Print job settings
167)
Chapter 9 - References
4
243