Canon imagePRESS C800 Series Operation Manual page 146

Hide thumbs Also See for imagePRESS C800 Series:
Table of Contents

Advertisement

Load media into the special feeder
Procedure
Action
1
Open the special feeder.
2
Squeeze and slide the paper guides towards
the sides of the tray.
3
Pull out the auxiliary tray for large media sizes.
4
Load the media into the special feeder.
Use the correct orientation for the envelopes.
(See
page
5
Align the media precisely between the paper guides.
After you finish
• When a paper jam occurs or you notice poor image quality, turn over the media stack and
reload the media stack. Do not reload textured, single-sided coated, or already printed paper to
avoid a paper jam. For these media, take a new stack.
• Tightly rewrap the remaining media in the original package, and store the package in a dry
place, away from direct sunlight or high temperatures.
146
Chapter 5 - Print the jobs
IMPORTANT
• Make sure the loaded media stack
does not exceed the loading limit
mark ( ).
• Load a maximum of ten enve-
lopes.
Feed instruction for envelopes on
261)
imagePRESS C800 Series

Advertisement

Table of Contents
loading

Table of Contents