Canon imagePRESS C800 Series Operation Manual page 14

Installation precautions
Do not remove the machine's leveling feet after the machine has been installed.
If you put weight on the front of the machine while the drawers are pulled out, the machine
may fall forward. To prevent this from happening, make sure that the machine's leveling feet
are in place.
• Avoid installing the machine at high altitudes of about 3,000 meters above sea level, or
higher.
Machines with a hard disk may not operate properly when used at high altitudes of about 3,000
meters above sea level, or higher.
Select a safe power supply
• Plug the machine into an outlet that is 208 V AC 20 A or greater.
• Make sure that the power supply for the machine is safe, and has a steady voltage.
• Do not connect other electrical equipment to the same power outlet to which the machine is
connected.
• Do not connect the power cord to a multiplug power strip, as this may cause a fire or
electrical shock.
• The power cord may become damaged if it is stepped on, affixed with staples, or if heavy
objects are placed on it. Continued use of a damaged power cord can lead to an accident, such
as a fire or electrical shock.
• The power cord should not be taut, as this may lead to a loose connection and cause
overheating, which could result in a fire.
• If excessive stress is applied to the connection part of the power cord, it may damage the
power cord or the wires inside the machine may disconnect. This could result in a fire. Avoid
the following situations:
• Connecting and disconnecting the power cord frequently.
• Tripping over the power cord.
• The power cord is bent near the connection part, and continuous stress is being applied to
the power outlet or the connection part.
• Applying excessive force on the power plug.
Moving the machine
If you intend to move the machine, even to a location on the same floor of your building, contact
your local authorized Canon dealer beforehand. Do not attempt to move the machine yourself.
Provide Adequate Installation Space
Provide enough space on each side of the machine for unrestricted operation.
When the Output Tray-A1, Duplex Color Image Reader Unit-H1, and control panel are attached:
14 Chapter 1 - Preface
imagePRESS C800 Series