Load media into the internal paper trays
Procedure
Action
1
Grip the handle and pull out the paper tray un-
til it stops.
2
Remove all media.
3
Slide the paper guides to match the media size
you want to load.
4
Place the media stack against the right side of
the paper tray.
5
Gently close the paper tray and make sure it
clicks into place.
After you finish
• When a paper jam occurs or you notice poor image quality, turn over the media stack and
reload the media stack. Do not reload textured, single-sided coated, or already printed paper to
avoid a paper jam. For these media, take a new stack.
• Tightly rewrap the remaining media in the original package, and store the package in a dry
place, away from direct sunlight or high temperatures.
136
Chapter 5 - Print the jobs
IMPORTANT
Slide the guides until they click into
place. This prevents a paper jam,
poor print quality and dirty machine
parts.
IMPORTANT
Make sure the loaded the media
stack does not exceed the loading
limit mark (
).
CAUTION
When you close the paper tray, be
careful not to get your fingers
caught. This can cause personal in‐
jury.
imagePRESS C800 Series